Jiubang smart lock is different from the traditional door lock. Jiubang smart lock needs a battery to ensure its operation. How to replace it if the battery of Jiubang smart lock is dead? What should I do if I want to change my password? Xiaobian will bring you a tutorial on the use of Jiubang smart lock to answer these questions.
Jiubang Smart Lock Use Tutorial
1. Replace the battery
When Jiubang smart lock prompts that the battery is low, it means that the battery needs to be replaced. Just open the battery cover by yourself. Generally, four batteries of 1.5V alkaline AA model can be replaced. Most of the battery covers are located above the back panel inside the door. There may be differences in the design of different smart locks.
2. Restore the factory settings
Many people habitually forget the management password, but don’t worry, you can find the factory management password only by mastering the method of restoring the factory settings. First, when the power is on, press and hold the initialization button of the smart door lock for more than 3 seconds, and then you will hear a voice prompt: "Restoring, please wait a moment, the password is too simple, please modify the management password in time", which means that the smart door lock has been initialized successfully. Then enter the management password, and then modify the settings again.
3. There are many unlocking methods for Jiubang Smart Lock, so you don’t have to worry even if you forget your password. The unlocking methods for Jiubang Smart Lock include fingerprint unlocking, password unlocking, swipe card unlocking, key unlocking, mobile phone remote unlocking, face brushing unlocking, iris recognition, ID card unlocking, Bluetooth unlocking, remote unlocking, temporary authorized password unlocking and so on.
How to change the battery of Jiubang smart lock
When Jiubang smart lock has the following conditions, it means that the battery energy is about to run out:
1. When using Jiubang smart lock, the green light is on, but there is no motor sound;
2. When using Jiubang smart lock, the green light is on, but the motor sound is very small;
3. When using the Jiubang smart lock, there is no response when pressing the fingerprint, and then there is no response when pressing the number keys.
At this time, it means that it is necessary to replace the battery for Jiubang Smart Lock. So how should the battery be replaced?
Generally, the battery is installed inside the electronic door lock, that is, inside the door. Because of the different designs of smart door locks of various brands and models, the battery cover of some smart door locks can be opened directly, while some smart door locks need to be removed with a screwdriver.
No matter what method is used, just open the battery cover of Jiubang Smart Lock, then remove the original battery and replace it with a new one.
How to change the password of Jiubang smart lock
1. Administrator password setting
Operating steps: press the setting key to ring the drip once → press the start key → enter the password (3-8 digits) → ring the drip → the operation is successful.
2. Door opening card, password, fingerprint lock and remote control settings
Operating steps: press the set key once → press the start key → enter the password (3-8 digits) → press the start key → enter the number → press the start key → enter the door (3-8 digits) → confirm the end → the password is set successfully;
Point your finger at the fingerprint window to read the fingerprint → After clicking → Press the same finger again to read the fingerprint. If the two readings sound the same, it means that the fingerprint entry is successful; The card to be set is close to the induction area to set the induction card; Press any key of the remote controller to set the remote controller.
3. Delete the door opening card, password, fingerprint and remote control.
Operating steps: press the setting key → press the start key → enter the administrator password → press the start key → enter the fingerprint to be deleted, the password and the corresponding number of the remote controller for confirmation.
4. Delete all cards, fingerprints, remote controls and passwords.
Operating steps: wake up the screen → press the setting key → press the start key → enter the administrator password to confirm.
If you have other difficult questions, you can also consult the after-sales service: 400-8388-875.
Note: due to the increase in maintenance, the hotline is easy to be busy; Please dial more times; Please forgive me! All-weather and all-day service for you.
Installation method of Jiubang intelligent lock
Although the steps and methods of installation and disassembly are quite different, we should pay attention to the fact that the screws should not be too tight when installing, otherwise the handle of the security door is not easy to open. When changing the lock core, people should not only consider how much it costs to change the lock core of the security door, but also how to change the lock core of the security door. In fact, how much it costs to change the lock core of the security door is second, and the main thing is that we should learn how to change the lock core of the security door, so that our safety can be guaranteed. After reading the above two steps, it is not so difficult to change the lock core of the security door. The security of anti-theft door is very high, and installing intelligent lock core for anti-theft door gives our home a double-layer guarantee. When installing intelligent lock core for anti-theft door, we should master the method of correctly installing intelligent lock core for anti-theft door, keep in mind the relevant precautions, and ask professional personnel to install it to avoid problems in the process of using intelligent lock core for anti-theft door. # # # Find the position of the lock cylinder screw hole and unscrew the lock cylinder screw. Turn the key slowly, and the whole lock cylinder can be pulled out from the lock body at a certain position, that is, when the fork is pulled in the lock cylinder groove. At this time, measure the size of the existing lock cylinder.
The above is a tutorial on the use of Jiubang smart lock introduced by Xiaobian. How to change the battery of Jiubang smart lock? If the modification fails, and you can’t operate it, please call 400-8388-875! We have some knowledge about the use of Jiubang smart lock. Of course, when we buy a smart lock, we can’t just say that it’s not good just because the price is cheap, nor can we say that the more expensive the better. Instead, we must learn to choose a password lock so that consumers can use less price and buy a password lock with good quality.