Manshen smart lock is different from the traditional mechanical lock. The traditional mechanical door lock can be used permanently without worrying about electricity, but Manshen smart lock needs batteries because it is electronically controlled and many functions need the support of electricity. So what should I do when the Manshen smart lock is dead? How to change the battery of Manshen smart lock? In the next article, Xiaobian will introduce you in detail and bring you the method of how to change the password of Manshen smart lock.
How to change the battery of Manshen smart lock
When the Manshen smart lock at home has the following conditions, it means that the battery energy is about to run out:
1. When using Manshen smart lock, the green light is on, but there is no motor sound;
2. When using Manshen smart lock, the green light is on, but the motor sound is very small;
3. When using Manshen smart lock, there is no response when pressing the fingerprint, and then there is no response when pressing the number keys.
Generally, the battery is installed inside the electronic door lock, that is, inside the door. Because the design of smart locks of different brands and models is different, the battery cover of some smart locks can be opened directly, while some smart locks need to be removed with a screwdriver.
No matter what method is used, just open the battery cover, then remove the original battery and replace it with a new one.
How to change the password of Manshen smart lock
1. Administrator password setting
Operating steps: press the setting key to ring the drip once → press the start key → enter the password (3-8 digits) → ring the drip → the operation is successful.
2. Door opening card, password, fingerprint lock and remote control settings
Operating Steps: Open the battery cover → Press the setting key once → Press the start key → Enter the password (3-8 digits) → Press the start key → Enter the door (3-8 digits) → Confirm the end → Password setting is successful;
Point your finger at the fingerprint window to read the fingerprint → After clicking → Press the same finger again to read the fingerprint. If the two readings sound the same, it means that the fingerprint entry is successful; The card to be set is close to the induction area to set the induction card; Press any key of the remote controller to set the remote controller.
3. Delete the door opening card, password, fingerprint and remote control.
Operating Steps: Open the battery cover → Press the setting key → Enter the administrator password.
→ Press the Start key → Enter the fingerprint, password and corresponding number of the remote controller to be deleted → Press the # key.
4. Delete all cards, fingerprints, remote controls and passwords.
Operating steps: open the battery cover → press the setting key three times continuously → press the start key → enter the administrator password for confirmation.
The above is a general modification method. For details, please consult after sales: 400-8388-875.
Tips: Never lock the door when operating by yourself, so as to avoid setting mistakes; Can’t open the door! It is recommended to find professional customer service and master to guide the operation!
Application method of Manshen intelligent lock
1. Replace the battery
When the smart door lock indicates that the battery is low, it means that the battery needs to be replaced. Just open the battery cover by yourself. Generally, four batteries of 1.5V alkaline AA model can be replaced. Most of the battery covers are located above the back panel inside the door. There may be differences in the design of different smart door locks.
2. Restore the factory settings
Many people habitually forget the management password, but don’t worry, you can find the factory management password only by mastering the method of restoring the factory settings. First, when the power is on, press and hold the initialization button of the smart door lock for more than 3 seconds, and then you will hear a voice prompt: "Restoring, please wait a moment, the password is too simple, please modify the management password in time", which means that the smart door lock has been initialized successfully. Then enter the management password, and then modify the settings again.
3. There are many ways to unlock the smart door lock, so you don’t have to worry even if you forget the password. There are fingerprint unlocking, password unlocking, credit card unlocking, key unlocking, mobile phone remote unlocking, face brushing unlocking, iris recognition, ID card unlocking, Bluetooth unlocking, remote unlocking and temporary authorized password unlocking.
How to change the battery of Manshen smart lock and how to change the password of Manshen smart lock are introduced here for everyone. Manshen smart lock generally has no quality problems. For the use of Manshen smart lock, everyone still needs to be clear, so it is easier to use.