With the development of science and technology, people’s requirements for home environment are getting higher and higher, and smart locks are no longer standard for high-end luxury houses. When the smart lock is in high use, an administrator should be set up. The administrator holds the rights of password, fingerprint entry, record opening, query and deletion, so the administrator had better choose a master who is familiar with the operation and stable at home. So how to change the password of the card smart lock? Let’s introduce it to you.
How to change the password of card smart lock
Card smart lock can restore the factory settings by changing the password. After that, there is no initial password. Just go directly to the administrator settings and set the password.
1. Administrator password setting
Operating steps: open the battery cover → press the setting key → press the start key → enter the password (3-8 digits) to confirm → sound a drip → the operation is successful.
2. Door opening card, password, fingerprint lock and remote control settings
Operating steps: open the battery cover → press the setting key → press the start key → enter the password (3-8 digits) for confirmation → enter the number (00-99)→ press the # key → press the start key → enter the door (3-8 digits) → press the # key to finish the password setting;
Point your finger at the fingerprint window to read the fingerprint → After clicking → Press the same finger again to read the fingerprint. If the two readings sound the same, it means that the fingerprint entry is successful; The card to be set is close to the induction area to set the induction card; Press any key of the remote controller to set the remote controller.
3. Delete the door opening card, password, fingerprint and remote control.
Operating steps: open the battery cover → press the setting key → press the start key → enter the administrator password → press the start key → enter the fingerprint, password and corresponding number of the remote controller to be deleted → press the # key.
4. Delete all cards, fingerprints, remote controls and passwords.
Operating steps: open the battery cover → press the setting key three times continuously → press the start key → enter the administrator password → press the # key.
If the modification fails, you can consult us through the above!
(extended information)
Usage of card intelligent door lock
1. Replace the battery
When the card smart door lock prompts that the battery is low, it means that the battery needs to be replaced. Just open the battery cover by yourself. Generally, four 1.5V alkaline AA batteries can be replaced. Most of the battery covers are located above the back panel inside the door. There may be differences in the design of different smart door locks.
2. Restore the factory settings
Many people habitually forget the management password, but don’t worry, you can find the factory management password only by mastering the method of restoring the factory settings. First, when the power is on, press and hold the initialization button of the smart door lock, and then you will hear a voice prompt: "Restoring, please wait a moment, the password is too simple, please modify the management password in time", which means that the smart door lock has been initialized successfully. Then enter the management password, and then modify the settings again.
3. There are many ways to unlock the smart door lock, so you don’t have to worry even if you forget the password. There are fingerprint unlocking, password unlocking, credit card unlocking, key unlocking, mobile phone remote unlocking, face brushing unlocking, iris recognition, ID card unlocking, Bluetooth unlocking, remote unlocking and temporary authorized password unlocking.
The setting function of card smart locks is still easy to operate, and each smart lock has instructions, which are easy to understand and operate. That’s all for the above contents about changing the password of the card smart lock. If you want to know more about the smart lock, please leave a message at the bottom of the article!