Geithmann fingerprint lock is a representative brand of electronic locks of Asahel Group with a history of 26 years. In the past 20 years, Geithmann fingerprint lock has supplied excellent electronic locks to 56 countries and regions around the world, and obtained a total of 111 appearance patents and 228 technology patents. In Korean electronic lock industry, Geithmann fingerprint lock has been outstanding. This article will introduce the advantages and setting methods of Geithmann fingerprint lock linkage mode, as well as other common problems and solutions about Geithmann fingerprint lock.
Advantages of Geithmann fingerprint lock linkage mode
When adding fingerprints, passwords, cards, remote controllers or mobile phone Bluetooth in linkage mode, Geithmann fingerprint lock products need to input a number first, which is very convenient for future management. If you accidentally forget your password and fingerprint, or lose your card and Bluetooth-bound mobile phone, you can delete these keys accurately by number, instead of deleting all the keys at once in normal mode and then adding them.
And like Geithmann b360 fingerprint lock, if you want to link other smart products, you must be in the linkage mode (you can link American control4 brand products), but you don’t have this function in the general mode.
How to set the linkage mode of Geithmann fingerprint lock?
Step 1: Touch the fingerprint lock touch screen with your palm to activate the keyboard, that is, let the keyboard light light up.
Step 2: Enter the user password (the user password is set in normal mode, and the system defaults to normal mode when it leaves the factory), then press "Set key", then press [4] and [#] to confirm.
Step 3: Press [1] to select the fingerprint lock switching mode, and press [#] to confirm. Then enter a 6-10-digit management password (you can enter this password at will, but you must remember it, otherwise you will have to replace the motherboard), and press the [#] key to confirm. Repeat the password again, and then press the "Set Key" indoors.
Common Problems and Solutions of Fingerprint Lock in Geithmann
1, no electricity, press any key no response.
Solution: If the battery is not installed or installed backwards, open the battery cover and install the battery correctly.
2. Closing the door cannot be automatically locked.
Solution: Check whether the fingerprint lock is set to manual locking mode and switch it to automatic locking mode.
3, mobile phone Bluetooth connection is not available.
Solution: The network module may not be installed, or the operation is improper. You can check whether the network module has been installed, and then try again according to the correct operation steps.
4, open the door, push and pull the handle stuck.
Solution: Check whether the door is deformed, whether there is a problem with the square shaft size, whether the fingerprint lock is installed correctly, correct the door according to the customer service prompt, check the square shaft size, and then re-install the square shaft correctly.
5. The fingerprint cannot be registered.
Solution: It should be caused by a problem with the integrity of your fingerprint or improper operation. You can change the finger that entered the fingerprint, and then scan the fingerprint registration correctly.
6. The registration operation prompts "Storage space is full"
Solution: It is possible that this lock has been entered with too many fingerprints during factory testing or has been used before, and many fingerprints have been registered. You can delete all fingerprints and then re-register.
7. Voice prompts that the fingerprint module is damaged
Solution: There is too much dust in the fingerprint module, which leads to an identification error or a fault in the fingerprint module. You can clean up the dust of the fingerprint module and try again. If it still doesn’t work, you can only replace the fingerprint module.
8. The fingerprint lock indicates that the battery is insufficient.
Solution: If the battery is used for too many times and for too long, it will be exhausted. Just replace the battery.
9. Power consumption is too fast
Solution: This lock can be used for about one year if it is unlocked ten times a day, but if you find that your fingerprint lock is dead for half a year or less, it may be that the motherboard of the fingerprint lock is faulty, or the lock body circuit is faulty, and the cable is crushed. You can check the reason before replacing the motherboard, lock body or checking the internal installation.
10. Forgot the administrator password
Solution: Because this lock can’t be forcibly restored to the factory settings, if this happens, you can either keep the existing settings and continue to use them, or you can only disassemble the fingerprint lock and replace the motherboard, which shows the importance of managing passwords for fingerprint locks in Geithmann.
11. Push/pull the door handle inside the door, but push/pull the door directly outside the door.
Solution: This may be the installation problem of the fingerprint lock. It should be that the installation master installed the front and rear shafts backwards. You can contact customer service and apply for re-installing the square shaft correctly.
The above is about the advantages and setting steps of Geithmann fingerprint lock linkage mode, as well as some common problems and solutions about Geithmann fingerprint lock. Geithmann fingerprint lock has rich functions and strong enough security, which is very suitable for families with high requirements on safety and convenience. Friends in need can consider buying it.