With the popularity of the concept of smart home, there are many types of smart lock brands in the market, and Babai smart lock is one of them. Considering the security and privacy, many friends want to replace the door lock at home with a smart lock, but they have given up the idea by hearing others say that it is more troublesome to change the password with a smart lock. In fact, with the development of science and technology, smart locks are becoming more and more humanized, and it is becoming easier to modify passwords. We will take the eight hundred smart lock as an example to explain the password setting of the eight hundred smart lock.
Password setting of Babai smart lock
1. Set the administrator password
Open the battery cover; Press the setting key once to ring the drip sound; Press the start key (one digit behind the number 3 on the keyboard), enter the password (3-8 digits) and press the # key; The operation was successful when the drip sounded.
2. Enter the password and fingerprint
Open the battery cover and press the set key once; Press the start key, enter the password (3-8 digits) and press the # key; Press the start key, enter the number (00-99) and press the # key; Press the start key, enter the door opening password (3-8 digits), press the # key to finish, and the password is set successfully; Point your finger at the fingerprint window to read the fingerprint. After clicking, press the same finger again to read the fingerprint, and the two readings have the same sound, indicating that the fingerprint is successfully entered. The card to be set is close to the induction area, and an induction card is set; Press any key of the remote control to set the remote control.
3. Delete existing passwords and fingerprints.
Open the battery cover and press the setting key twice continuously; Press the start key, enter the administrator password, and press the # key; Press the Start key, enter the fingerprint, password and corresponding number of the remote controller to be deleted, and press the # key. To delete the fingerprint, point your finger at the fingerprint window to read the fingerprint. The card to be deleted is close to the sensing area, and press any key of the remote control.
Brief introduction of Babai intelligent lock
Shenzhen Babai New Technology Co., Ltd. is a high-tech industrial company specializing in the research, development, production, sales and technical service of intelligent anti-theft locks. Relying on the leading international R&D technology in the United States, the company integrates IT, digital, electromagnetic induction, passive non-contact, micro-motor, remote unlimited remote control, human body information identification and other high-tech, develops and produces personalized intelligent anti-theft door locks that combine contact induction, non-contact induction, password, fingerprint, ID card induction, mobile phone induction, SMS identification and telephone remote unlocking, and has now entered the domestic and foreign markets.
How to install eight hundred smart locks?
1. Preparation work
The installation width position of the smart door lock is confirmed. There are two widths: the large lock core is at least 100mm and the small lock core is at least 110mm Note: the width of the smart door lock refers to the width from the door edge to the center edge of the lock body near the door; For example: stainless steel door with glass in the middle, the plane on the door edge is less than 100mm, the lock core can’t be installed or the lock core is installed and the lock body presses against the glass. If the old door is refitted, please make sure that the new lock can cover the original lock hole after installation. If the original lock is bulky and the new smart door lock cannot cover the original lock hole after installation, it is not recommended to install it unless there are enough complete tools and skilled skills.
2, draw the hole line
Draw opening lines: Draw lines on the front, back and side of the door according to the opening drawings provided by the factory. Draw the opening line on the front of the door: firstly, determine the installation height of the smart door lock. The height of the center of the handle is 90-110CM away from the bottom of the door, and draw the perforated line according to the opening drawing. The center is away from the door. Draw the opening line on the back of the door: draw the line on the back of the door in the same way as above. The center is away from the door. Draw the opening line of the door side: draw the center of the door side, and draw the opening line of the door side according to the opening. Draw the opening line of the door frame: after the lock core is installed, open the opening line of the door frame according to the corresponding position of the lock core. Pay attention to the height of the corresponding lock core when opening the door frame. If the lock hole on the door frame is not opened properly, it will cause the back door to shake or the lock tongue cannot be locked.
3, open the door hole
Open the side hole according to the drawn hole line. Note: The side door lock is one of the most critical parts of opening, so it is necessary to carefully open the hole to prevent fiber flash and prevent the opening from being too large and rough. After opening the hole, check it with the lock cylinder. If it is not suitable, it should be corrected accordingly. Open the front face and back face according to the drawn opening line. Note: When opening holes, it is necessary to prevent wood fibers from flashing, and prevent the opening from being too large and burr. Open the door hole of the door frame according to the drawn opening line. Attention: Be careful to open the hole to prevent the fiber from flying, prevent the hole from being too large and rough, and the hole size of the door frame should be high to prevent the door lock from shaking due to the virtual position.
4. Install smart door locks
Lock core installation: Install the lock core into the door panel, and make the cable pass through the inside of the door. Be careful not to break the cable. Install the front lock body: install the rubber pad and handle spring, insert the square shaft into the front clutch hole, make sure that the triangular arrow of the front clutch is facing down, rotate the mechanical key pick to the vertical direction, insert it into the cross hole of the lock cylinder, and thread the cable into the door. Then align the square shaft with the handle hole to push the front lock body to the door panel, and check whether the rubber pad is installed. Lift the handle lightly to check whether the square tongue can be punched out. If it cannot be punched out, check whether the square shaft jumps out of the front clutch hole. Install the rear lock body: install the rubber pad and handle spring, insert the square shaft into the rear clutch hole, insert the square shaft into the small swing arm hole, punch out the square tongue, insert the lock core cable, connect the front and rear lock bodies with the cable, turn the anti-lock knob to "CLOSE", align the square shaft with the handle hole and the square shaft with the knob hole, install the rear lock body, screw on the fixing screw, and turn the anti-lock knob to "OPEN" state. Check whether the front and rear lock bodies are parallel to the door, rotate the front and rear handles to check that there is no jamming phenomenon, install the battery, check the keys, swipe cards, fingerprints and mechanical keys one by one, and test the opening and closing actions with the factory password. Lock and buckle box: pay attention to the fact that each lock tongue cannot be buckled out of place, and the door cannot be shaken. Set the password, card, fingerprint and other intelligent key of the smart lock.
The above is the password setting of Babai smart lock, which is introduced to you in detail. If you don’t know what brand to buy when buying smart lock, you can consider buying Babai smart lock. When installing smart lock, you can install it according to the above introduction. If you really can’t install it, you still have to find a professional master to install it.