Adjustment method of keys for remote control car of Audi C5A6 in 2000. Laiwu Audi is equipped with car keys.

　　Adjustment method of keys for remote control car of Audi C5A6 in 2000. Laiwu Audi is equipped with car keys.

　　Adjustment method of keys of Millennium Audi C5A6 remote control car: two remote control keys C5A6 truck. If you want to add another remote control key, you must adapt and match the central locking controller.

　　2: If the fault codes 00955 to 00958 and the remote control key change batteries, matching operation is required. Key steps to adapt to a new anti-theft key:

　　A: Turn the ignition key (you need to use the secondary key of the original car). B: The number of keys in block 007 has been measured. Check how many keys there are. C: Lock the car key outside the door and lock the driver’s door. Within 5 seconds, press the key "Open" button on the remote control. Even in the highest memory position, the alarm light will flash every time you press the approval, wait for 5 seconds, and then press the key "Open" again to open the door. D: Turn off the ignition switch and unplug the ignition key. E: Re-check the existence and function of the remote control key.

　　Note: It should be noted that you must use a new key storage location for fitting. If you use a storage site (put "1") to adapt to matching, then the previous car key location will be invalid. The key was invalid before. If there is a new remote control, you can follow the same steps.

　　Note: Replace the battery on the remote controller and display the fault codes 00955 to 00958. Please operate this step here. Press a key on the remote control key. If the door is not opened or locked:

　　Open and close the door that locks the driver within 30 seconds. Verify that the remote control function is normal.

　　The article is compiled and published by this auto repair blog. Please refer to the operation guide.