Adding fingerprints or other settings to household fingerprint locks is a very important job, which can bring users a safe and convenient experience. For users who own Bedford fingerprint lock, they need to know how to add fingerprints. Here’s how to add fingerprints to Bedford fingerprint lock.
For specific questions, please call our after-sales service center directly: 400-8388-875!
How to set Bedford smart lock?
1. Enter the management mode according to Bedford smart lock instructions.
In order to add fingerprints, we need to enter the management mode of Bedford fingerprint lock according to the instructions. After entering the management mode, we can start adding fingerprints.
2. Follow the prompts to add fingerprints.
First, put the fingerprint to be added on the scanning fingerprint key according to the prompt, and Bedford fingerprint lock will automatically scan. When the scanning is completed, press the adding fingerprint key to complete the operation of adding fingerprints. After adding the fingerprint, you can follow the prompts to complete the setting of the new fingerprint.
3. Complete the fingerprint adding operation.
Finally, make sure that the fingerprint we want to set has been added to Bedford fingerprint lock. If the confirmation is completed, you can exit the management mode according to the prompt, thus completing the fingerprint adding operation of Bedford fingerprint lock.
How to install Bedford smart lock
Before installation, we need to confirm the installation environment of Bedford fingerprint lock, including the flatness of the ground, the hardness of the wall and the position of the fingerprint lock from the crack of the door, so as to ensure that Bedford fingerprint lock is installed firmly and reliably. Before installation, Bedford smart lock should pay attention to the following points:
(1) The door opening direction is left inward opening, right inward opening, left outward opening and right outward opening; It should be noted that the direction of door opening directly affects the direction of door handle and lock tongue.
(2) Check whether the side panel size is appropriate. The national standard lock body side panel size is 24 * 240 mm. If it does not meet the requirements, contact the manufacturer to customize the side panel according to the door size.
How to record fingerprints in Bedford smart lock?
1. Open Bedford Smart Lock: Install the battery in Bedford Smart Lock and open Bedford Smart Lock.
2. Enter the settings: press the "Settings" button, enter the administrator password, wait for Bedford’s door lock to recognize the administrator’s fingerprint, and then prompt to enter the settings successfully.
3. Set fingerprints: press the "Set" button to prompt for adding fingerprints, and enter the fingerprints of fingers in turn according to the instructions of the fingerprint meter.
4. Save the settings: press the "Save" button to complete the fingerprint setting according to the instructions, and finally you will be prompted to complete the setting.
For specific operation steps on how to set Bedford smart lock, please refer to Bedford lock manual or contact our after-sales customer service for help. Fingerprint password lock brings convenience and security to our family, but only by mastering the correct way of inputting fingerprints can fingerprint password lock play its greatest role.