Nowadays, many families will install smart locks, and smart locks are divided into password input and fingerprint identification, but fingerprint identification will be more convenient than password input, but some people don’t know how to set fingerprints in Superman smart locks. Then, next, we will introduce the setting steps of Superman smart lock and the precautions for setting fingerprints of Superman smart lock.
Superman smart lock setting steps
1. Add an administrator
First, add an administrator to the Superman smart lock, then find the "Set Key", and then click "Add Administrator". At this time, you will be prompted to operate step by step until the fingerprint is successfully recorded.
2. Add user fingerprints
When adding, you must first verify the administrator, then press the smart lock menu to verify the administrator’s fingerprint, and select "Fingerprint Settings" to enter the fingerprint. Different models have different modification methods! You can consult the telephone for guidance and modification: 400-8388-875.
Matters needing attention in setting fingerprint of Superman smart lock
1, "administrator" permissions should be carefully selected.
Some smart locks have the function of "Administrator", and they can enter, delete, query and other permissions. For those who don’t know fingerprints, don’t enter "Administrator" permission, or they will operate in disorder.
2. Wipe your fingers clean
When collecting fingerprints, the fingerprints must be wiped clean, and other foreign objects cannot be used, otherwise it will affect the fingerprints behind, and the fingerprint entry will be unsuccessful.
3. Enter more spare fingerprints.
When recording fingerprints, you can enter more fingerprints, because there is no guarantee that which finger fingerprint will always be in good condition, which may lead to careless wear or damage in the future, making it impossible to unlock it with fingerprints.
If the modification fails, and it will not be operated, please call 400-8388-875.
Tips: Never lock the door when operating by yourself, so as to avoid setting mistakes; Can’t open the door! It is recommended to find professional customer service and master to guide the operation!
Installation Steps of Superman Smart Lock
1. Check and judge whether the target door meets the conditions for installing the Superman smart lock. First, check the type of the target door, and then whether the effective installation width of the lock installation position reaches the width of the Superman smart lock body, and whether the final effect of the installation scheme can be accepted by customers. If these conditions are all right, we can continue the following steps.
2. Measure several main parameters of the old lock on the door, mainly measuring the size of the locking tongue limit piece (side decorative plate) of the old lock on the original door, including the length, width, the position of fixing screws (the distance between the center point of the screw hole and the horizontal and vertical sides) and the number of fixing screws (one from top to bottom or one pair from top to bottom), then measuring the thickness of the door and determining the direction of the door (divided into four types: left inside, left outside, right inside and right outside) ) Through the above measurement and observation, remember the parameters to determine whether it is necessary to order the side decorative board. If the side decorative board of the original security door is not the standard 30*240 or 24*240, it is generally necessary to order it, and the cost is about 50 yuan.
3. Remove the original lock, determine the material, specifications and relevant parameters of the original door, and prepare to install accessories. First, remove the original lock and keep it in a box, which will be kept by the customer. If the Superman smart lock needs to be removed for maintenance, it can be temporarily replaced by installing the original lock.
4. Install the new lock body and lock core. After removing the old lock body, install the lock body of Superman Smart Lock (the lock body needs to be installed with the side trim panel first), hang up the heaven and earth pole, and then fix it with screws. Next, insert Fangpu’s high-safety lock cylinder into the lock cylinder hole of the lock body, and insert and tighten the lock cylinder from the side with special screws. After the lock is fixed, insert the key into the lock cylinder and turn the lock cylinder to test whether the lock body can be opened and whether the lock is normal.
5. Install the handles of the front and rear panels first, pay attention to the direction when installing, and don’t forget to use the spring pad when screwing, so as to prevent the handle screws from loosening after a long time of use. Then screw on the upper and lower screw sleeves of the rear cover plate, and insert the square bar spring into the square hole of the handle (this is very important, the spring is an important device to resist the square bar and prevent it from withdrawing from the rotating hole of the lock body. Remember to install the spring, otherwise, if the square bar withdraws from the lock body, it will lead to electronic failure to unlock, and the lock can only be unlocked by emergency mechanical unlocking). Then install the handle of the rear panel. According to the thickness of the door, cut off the excess length of the connecting rod piece of the anti-lock button, insert it into the anti-lock button and lock it with screws. Install the rubber gasket on the front and rear panels. Install the front panel to the door first. When installing, connect the lock body wire with the lock body control wire plug on the front panel. Then insert the battery wire into the door through the upper fixing screw hole and extend out. Insert two square bars into the front and rear bar holes of the lock body. When inserting, select a square bar with an appropriate length according to the door thickness. Note that the square bar should not be too long, and it is advisable to insert it into the square bar hole of the front and rear panels between 1CM and 3CM. If the square bar is too long, the handle will not rotate smoothly after the front and rear panel fixing screws are tightened. At this time, the square bar should be adjusted and replaced with a shorter one. After the front panel is installed, keep it still and install the back panel immediately. When installing the rear panel, please pay attention to first connect the battery box wires with the plugs of the battery wires of the front panel. And plug the extra thread into the door body, and be careful that the thread does not go to the activity space of the mast.In order to avoid the frequent movement of the mast from damaging the power cord. When installing the rear panel, pay attention to that the connecting rod piece of the anti-lock button should be inserted into the anti-lock button control hole of the lock body, and the square bar should also be inserted into the square bar hole of the handle. Make sure that the square bar spring is installed.
6. Check whether the handle and the lock tongue are working normally. After checking whether the lock tongue hole of the door frame is properly installed, turn the handle inside and outside the door to see whether the lock tongue of the lock body works normally and whether the handle returns smoothly. Test whether the anti-lock button works normally. If it is abnormal, loosen the screw to adjust the position and height of the lock, and then tighten the screw after it is normal. Check whether the door frame hole is normal, stand on the inside of the door, close the door, and lift the handle to see if the lock tongue can be inserted into the lock tongue hole on the door frame smoothly. If it is not suitable, use tools to correct it.
7. Initialize the Superman smart lock, and enter the fingerprint of the administrator. Generally, the fingerprint and password or card are not entered in the new Superman smart lock. However, it is better to enter the management mode and run the initialization operation before using it to ensure that the lock settings are restored to the factory default values and the original data is cleared. After the initialization is completed, enter the user’s administrator fingerprint and other information.
8, after the completion of the overall debugging input, do comparison and unlocking test, and test whether the lock works normally.
The above is all the knowledge about the setting steps of Superman smart lock and the matters needing attention in setting fingerprints of smart lock, which I will introduce to you today. I hope it can help you. After reading the introduction of the above small series, do you have a certain understanding of Superman smart lock? Superman smart lock is also an electronic technology product, so it is also a skill when setting Superman smart lock. I don’t know if friends can take a look at Xiaobian’s introduction.