Glass door locks are often seen on the doors of office buildings and offices. Glass door locks are usually made of high-strength structural steel or zinc alloy die-casting or stainless steel, and the surface treatment is mostly brushed or mirrored, which has a generous aesthetic feeling and a sense of fashion. So, what is a glass door lock? How to install the glass door lock?
What is a glass door lock?
Glass door locks are the types of door locks applied to glass doors. The common ones are hand locks, mortise locks, floor locks, etc. Different manufacturers have different specifications. With the development of science and technology, the glass door locks have appeared the cross key advanced door locks, magnetic card key door locks, password door locks, electronic door locks, fingerprint door locks, voice-activated door locks, etc., which are convenient for people’s daily life and provide corresponding security for life.
How to install the glass door lock
Glass door locks are still very common things. Generally, where glass doors are installed, there will be a lock installed in the middle or under the door, which is convenient for our travel and the indoor items are protected. When installing the glass door, it is difficult to install the general locks on the glass door. Even if some locks can be installed, it will affect the beauty of the whole door. Install the magnetic lock on the frameless glass door with U-shaped bracket.
Glass doors without frames need accessories to assist in installation. The installation method is basically the same as the surface installation method of ordinary doors, but it is different when installing the relay plate in the third step. The U-shaped groove, rubber buffer pad and stainless steel gasket (placed on one side of locking screw) are sleeved on the glass door, locked on the glass door with headless hexagon socket head screws, and then the relay plate is fixed on the U-shaped groove.
The AB frame is installed by fixing the AB frame with special glass adhesive (or double-sided adhesive tape) on the glass door, and then fixing the relay plate on the bracket.
When installing the glass door lock, it is necessary to pay attention to that the glass door must be equipped with an aluminum alloy frame. Because the locking suction and spacing requirements are less than 6 mm, the spacing between the door edge and the door frame is required to be less than 6 mm, and the ground spring needs to have a stable center of gravity, otherwise it will affect the positioning of the lock. If it is not positioned well, the lock will be easily deformed and will not be smooth to use.
The above is the introduction of relevant knowledge about glass door locks. If you want to know more about locks, please pay attention to China Smart Lock Network.