In order to ensure the safety of the room, many families have already used smart locks. Smart locks include password input, fingerprint identification, and password input and fingerprint identification. Compared with password input, fingerprint identification is much more convenient. However, when using lochman smart locks for the first time, many people may not know how to record fingerprints and how to install lochman smart locks. Next, I will tell you in detail.
Lochman smart lock how to record fingerprints?
1. Wake up the screen and enter the administrator interface.
2. Find User Management, add a user, and enter a password to confirm.
3. Select "Add User"
4. Select "Add Fingerprint"
5, the screen shows "please press your finger", put your finger in the smart lock fingerprint recognition place to enter the fingerprint.
6, if the upper fingerprint identification is successful, the screen will show "the first authentication passed, please press your finger again", and then put your finger in the fingerprint identification department of lochman Smart Lock to enter the fingerprint, which is set successfully.
The above are general modification methods, and different brand modification methods are different!
You can consult the telephone for guidance and modification: 400-8388-875.
Tips: Never lock the door when operating by yourself, so as to avoid setting mistakes; Can’t open the door! It is recommended to find professional customer service and master to guide the operation!
How to install lochman smart lock?
1. Confirm the lock condition: Confirm whether the installation conditions on site meet the installation requirements. For example: whether there is power supply; Whether there are specialized management personnel; Whether the decoration is completed, etc. See the Entry Confirmation for details, which contains a detailed introduction to ensure the safety of installation.
2. Door lock thickness: the thickness of the door lock is required to be 38 mm-55 mm. Special requirements shall be handled according to special requirements. (The thickness of the door lock is different, so the lock core, lock fixing screw length and punching requirements are different. Please explain to the manufacturer when ordering. ) confirmation of center distance: there are two center distances: 55mm and 70 mm.
3. Draw opening lines: Draw lines on the front, back and side of the door according to the opening drawing provided by the factory. Draw the hole line on the front and back of the door: determine the installation height of the door lock, and the height of the handle is 90CM away from the bottom of the door. (If the old door is modified, the door will still prevail.) Draw the hole line according to the hole drawing. Draw the side opening line of the door: first draw the center of the side of the door, and draw the side opening line for punching. Draw the opening line of the door frame. After installing the lock core, open the opening line of the door frame according to the corresponding position of the lock core (according to the requirements of the opening diagram). Opening of the door frame-be sure to pay attention to the height of the corresponding lock core.
4. Opening the door: first, open the front face and the back face according to the drawn opening line. It is necessary to pay attention to prevent wood fibers from producing flash when opening holes (it is best to cut the fibers along the opening line with a knife first) to prevent the opening from being too large. Open the door hole of the door frame according to the drawn opening line. Note: the hole ruler of the door frame is required to prevent the door lock from shaking due to the virtual position.
5. Install the door lock: After opening the packing box, first check whether the door lock parts are complete and the direction is consistent with the room, and test whether the computer lock core and circuit board work normally with the battery, and then start to install the door lock. Install the lock core into the door panel, with the connector inserted into the inner side panel, and all the fixing holes meet the requirements.
6. Install the mechanical lock head: Install the mechanical lock head into the lock core and screw it, and check whether the mechanical key can open the door. When installing the front and rear lock bodies, adjust the idling four-corner rotating sleeve of the lock core to the correct position (the square shaft and spring are marked in the inner hole of the four-corner rotating sleeve), and install the front lock body on the door panel.
Brief introduction of lochman smart lock brand
1. lochman Smart Lock is a brand of Camax Intelligent Technology (Shenzhen) Co., Ltd.. All along, lochman Smart Lock has made strict commitment to investors, customers, consumers and itself, based on honesty, sincerely dedicated high-quality products and first-class services and a harmonious atmosphere to the public, created the best development space for employees and created a harmonious development and inclusive attitude with customers, and opened up a win-win path for investors and partners and realized sustained returns.
2. lochman Smart Lock has been deeply involved in the lock industry for many years, and in combination with the market demand, it has continuously upgraded its own anti-theft security technology, creating a number of core technologies in leading industries. Now it has a number of national technical patents, and its locks are widely used in home locks, office locks and other fields, leading the frontier development of lock anti-theft technology.
3. lochman Smart Lock has many unlocking methods, such as fingerprint unlocking, password unlocking, credit card unlocking, WeChat unlocking and key unlocking, which makes unlocking convenient and safe. Using bank-grade semiconductor fingerprint identification technology, through special algorithm and layer-by-layer encryption, the identification speed is faster, and it can effectively identify false fingerprints, which is safer and more efficient. The design of virtual password module can still be unlocked by inputting any number before and after the correct password, which can protect the password from being peeked, save face and be safe in front of friends. Lochman smart lock adopts C-class lock core, which runs through the whole lock body. Even if the front panel is damaged, it is still a complete mechanical lock with excellent safety performance.
All right! The above is about how to record fingerprints of smart locks in lochman and how to install smart locks in lochman. I hope it will be useful to everyone. If your problem has not been solved, you can also consult the telephone for guidance and modification: 400-8388-875. Whatever you need, just call our maintenance service number and be at your service at any time. Welcome to continue China Smart Lock Network and learn more about smart locks.