More and more people are willing to buy smart door locks, because they are more secure, mainly including fingerprints and passwords, or they can open doors by combining three ways: keys. Moreover, the lock core of the key is also advanced, with double verification. In addition, it is combined with fingerprints and passwords, which can effectively ensure the safety performance and prevent thieves from getting in. Let’s take a look at the introduction of the instructions for the use of Wheeler smart lock!
For specific questions, please call our after-sales service center directly: 400-8388-875!
Instructions for use of Wheeler smart lock
Wheeler smart lock operation steps:
1) Open the battery cover.
2) Press the Set key once.
3) Press the start key, enter the password (3-8 digits) and press the # key.
4) Press the start key, enter the number (00-99) and press the # key.
5) Press the start key, enter the door (3-8 digits), press the # key to finish, and the password is set successfully;
Point your finger at the fingerprint window to read the fingerprint. After the click, press the same finger again to read the fingerprint. The two readings have the same sound, indicating that the fingerprint entry is successful; The card to be set is close to the induction area, and an induction card is set; Press any key of the remote control to set the remote control.
How to change the password of weiler smart lock
Let’s find the management password of Wheeler smart lock first, and then enter the management mode. Next, press the power button at the bottom, press the "*" key three times in a row, and stop when the buzzer of Weiler smart lock rings for a long time. Then, the user needs to enter the old password, press the # key to confirm, and stop when the buzzer rings for a long time, at which time the LED light flashes. The user can set a new password according to the voice prompt of Wheeler Smart Lock, and press the # key to confirm.
The steps to modify the password of Wheeler Smart Lock are as follows:
1. First find the power button at the bottom of the outer panel, aim at the "*" button, and press it three times continuously until the buzzer gives a long sound.
2. Then enter the old password, press the "#" key to confirm, the buzzer will ring for a long time, and the LED light will flash.
3. Then enter a new password of 6-12 digits, press the # key to confirm, and then the buzzer will ring again.
4. Re-enter the new password and press the "#" key to confirm the successful modification.
How to charge weiler smart lock?
You can choose USB charging treasure for emergency! The principle of smart door locks in the market is basically the same. First of all, when the battery is dead, the smart door will generate a low-voltage alarm prompt. If there is a "beep, beep, beep" alarm prompt, it is reminding the user that the door lock power is insufficient and the door lock battery needs to be replaced in time. To install the battery, you need to know the location of the battery, generally in the following locations: the rear panel, the lock body, and centralized power supply.
1. Rear panel: Most of the batteries are at the upper end of the rear panel, which are fixed by screws and can be disassembled and installed by a screwdriver.
2. Lock body: it is relatively rare in lock body, and it is generally common in hotel locks. The lock body of some electronic locks is a long lock body (lock body contains battery box). When disassembling, open the door and remove the guide plate (side bar) of the lock body, and the battery box will pop out, and then replace the battery.
3, centralized power supply: centralized power supply is even more rare, generally dozens of rooms or hundreds of rooms are centralized management, there is a fixed DC power supply, wiring to the lock of each room, this also does not need to find a battery cover, because there is no battery design.
This is the end of the introduction of the instructions for the use of Wheeler smart lock. For details, please refer to the instructions or consult our after-sales master! Generally, it is inconvenient to use the functions such as password or fingerprint registration, especially for the elderly and children. Individual smart locks can open a unique voice prompt function, making the operation easier and easier for users.