With the popularization of the concept of smart home, smart locks have entered thousands of households, bringing security to our home life. Because there are many brands of smart locks, when you choose to buy them, you must pay attention to shopping around and choose the safest smart lock with guaranteed quality and after-sales. But what if the smart lock suddenly runs out of power? Let’s take a look at what to do if the Luke smart lock is dead and how to change the battery of the Luke smart lock.
How to change the battery of Luke smart lock
1. When the fingerprint is used to unlock the lock, the green light is on, but there is no motor sound;
2. When the fingerprint is used to unlock the lock, the green light is on, but the motor sound is very small;
3. When using the fingerprint to unlock the lock, there is no response when pressing the fingerprint, and then there is no response when pressing the number keys.
Generally, the battery is installed inside the electronic door lock, that is, inside the door. Because of the different designs of smart door locks of various brands and models, the battery cover of some smart door locks can be opened directly, while some smart door locks need to be removed with a screwdriver. If you have other difficult questions, you can also consult the after-sales service: 400-8388-875.
What if Luke’s smart lock is dead?
1. The power supply standard of Luke Smart Lock is 6V, and the battery box can hold 8 batteries, which can last for more than 15 months. Not only has a strong endurance, but also when the fingerprint lock is less than 10%, there will be an intelligent reminder.
2. Don’t worry even if the power supply of Luke Smart Lock is exhausted. In this case, Luke Smart Lock has long been prepared, and Luke has prepared an excellent solution for you.
When the power of the Luke smart lock is too low, the smart lock will prompt in time to remind the user to replace the battery quickly. If the smart lock generates waves, when the fingerprint lock has 50 times left to open the door, the user will send out a low-voltage alarm every time he uses the smart lock until the user replaces the battery or the battery is completely exhausted.
3. Even if the battery power of the Luke smart lock is completely exhausted, the user can externally connect the USB charging treasure and temporarily connect the power supply to facilitate the user to open the door. When the smart lock runs out of power and it is impossible to buy an external power supply, if there is a mechanical key, you can use the mechanical key to temporarily open the door.
How to change the password of Luke smart lock
1. Administrator password setting
Operating steps: enter the administrator interface → press the start key (one digit behind the keyboard number 3) → enter the password (3-8 digits) → sound the beep → the operation is successful.
2. Door opening card, password, fingerprint lock and remote control settings
Operating steps: Go to the administrator interface, find user management → press the start key → enter the password (3-8 digits) → enter the number (00-99)→ press the start key → enter the door (3-8 digits) → press the confirm key to finish → the password is set successfully;
Point your finger at the fingerprint window to read the fingerprint → After clicking → Press the same finger again to read the fingerprint. If the two readings sound the same, it means that the fingerprint entry is successful; The card to be set is close to the induction area to set the induction card; Press any key of the remote controller to set the remote controller.
3. Delete the door opening card, password, fingerprint and remote control.
Operating steps: Go to the administrator interface → press the setting key → press the start key → enter the administrator password → confirm.
→ Enter the fingerprint, password and corresponding number of the remote controller to be deleted and confirm.
4. Delete all cards, fingerprints, remote controls and passwords.
Operating Steps: Open the cover → Press the start key → Enter the administrator password → Confirm.
If the replacement fails and it will not work, please call 400-8388-875.
Tips: Never lock the door when operating by yourself, so as to avoid setting mistakes; Can’t open the door! It is recommended to find professional customer service and master to guide the operation!
How to change the battery of Luke smart lock has been introduced by Xiaobian above. No matter which kind of battery can be used, people need to pay more attention to quality when buying batteries. At the same time, how to change the password of Luke smart lock can be operated according to the instructions, so that not only the product can be guaranteed, but also the operation is very convenient and faster.